Differences

This shows you the differences between two versions of the page.

--- getting_the_wiring_right [2022/08/01 22:49] – frchris
+++ getting_the_wiring_right [2022/08/03 11:25] (current) – frchris
@@ Line 1: / Line 1: @@
+====== Getting the Wiring Right ======
+===== Raspberry Pi 3+ =====
 In 2018 the Preinstalled BlueJ IDE, the Pi4J library that was in the directory ''/usr/share/bluej/userlib/''  did not recognize my new pi 3 B+. After [[http://wiringpi.com/wiringpi-updated-for-the-pi-v3plus/|installing the latest WiringPi]] and [[http://pi4j.com/install.html|intalling the latest Pi4J]],
 I still had to
@@ Line 43: / Line 49: @@
 </code>
 The kit I bought from CanaKit had wriiten the BCM numbers, but I needed to program with the wPi numbers.
+===== Raspberry Pi 400 =====
+In 2022 I got a Raspberry Pi4 400. Unfortunately, it was so new, the old gpio -v gave me the message "Oops - unable to determine board type... model: 19"
-In 2020 v.2 was ready.  Go to [[https://pi4j.com/architecture/about-the-code/download/]].  To get the new code, go to [[https://github.com/Pi4J/pi4j-v2|github/pi4j-v2]].
+I found some help at [[https://pi4j.com/1.4/install.html]].  I followed the "Easy Method" which produced the {{ ::pi4j-core.jar}} file that I needed.  In order for BlueJ to find it, I copied it over to the proper directory:
-In 2021 v.1.4 became the last update of [[https://github.com/Pi4J/.github/tree/main/profile|v.1]]
-[[http://wiringpi.com/wiringpi-updated-for-the-pi-v3plus/|wiringPi 2.36 for the Pi v3+]]
+<code>sudo cp /opt/pi4j/lib/*.jar /usr/share/bluej/userlib/</code>
-[[http://wiringpi.com/wiringpi-updated-to-2-52-for-the-raspberry-pi-4b/| wiring 2.52 for 4B]]
+[[https://pi4j.com/1.3/pins/rpi-400.html| GPIO pins on the 400]]
-Here are instructions for [[https://tutorials-raspberrypi.com/installing-wiringpi-and-pin-allocation/|installing the wiring libraries]]
-check with the command lin
-<code> gpio -v </code>